Incidental Food Contact NSF H1 Greases

PURITY™ FG, NSF H1 registered greases are advanced food grade lubricants specially formulated to deliver exceptional performance under the highly demanding conditions of food processing operations. They can be used in a wide range of general manufacturing machinery including sleeve and anti-friction bearings, slides and guides found in food processing machinery. PURITY™ FG greases exhibit good low temperature pumpability and excellent resistance to water wash-out and spray loss. In addition, they have excellent anti-wear, extreme pressure properties, and protect against rust and corrosion. PURITY™ FG2 and PURITY™ FG1 are recommended for the greasing systems in canning fillers found in the beverage industry.

PURITY™ FG1 and 00 are also preferred for centralized greasing systems.

Please refer to the Food Industry Registrations/Credentials chart on 360 Marketing Support (LUB3152) or contact your local representative.

Typical characteristics are shown below:


PURITY™ FG Greases
FG2
FG1 FG00
Soap Type Aluminum Complex Aluminum Complex Aluminum Complex
NLGI Grade 2 1 00
Color White White White
Worked Penetration @ 25°C 283 328 420
Dropping Point, °C/°F
277/531 266/511 211/412
Base Oil Viscosity, cSt @ 40°C
182 172 182
Base Oil Viscosity, cSt @ 100°C
17 16 17
Weld Point, kg
500 400 620
Operating Temperature Range min, °C/°F
-20/-4 -25/-13  -35/-31
Operating Temperature Range max, °C/°F
160/320 160/320 120/248

PURITY™ FG2 with MICROL™ MAX grease is a specially formulated lubricant that inhibits the growth of microbes that can cause lubricant degradation. PURITY™ FG2 with MICROL™ MAX is an NSF H1 registered lubricant formulated with a U.S. EPA registered antimicrobial product preservative.

PURITY™ FG2 with MICROL™ MAX exhibits good low temperature pumpability and excellent resistance to water washout and water spray loss. It also has excellent antiwear and extreme pressure properties and protects against rust and corrosion.

Typical characteristics are shown below:


PURITY™ FG2 WITH MICROL™ MAX†
NLGI Grade  2
Soap Type Aluminum Complex
Color Cream
Worked Penetration @ 25°C 292
Dropping Point, °C/°F
287/549
Base Oil Viscosity, cSt @ 40°C
182
Base Oil Viscosity, cSt @ 100°C
17
Weld Point, kg 315
Operating Temperature Range min, °C/°F
-20°C (-4°F) to 160°C (320°F)
Operating Temperature Range max, °C/°F/strong>
-20°C (-4°F) to 160°C (320°F)

†MICROL™ MAX is an antimicrobial product preservative.

PURITY™ FG2 Extreme grease is a high viscosity, semi synthetic, heavy-duty NSF H1 registered food grade grease specifically formulated for low to medium speed, heavily loaded industrial bearings operating under severe conditions. PURITY™ FG2 Extreme exhibits excellent protection in applications subjected to high temperature, high pressure, and heavy loads. PURITY™ FG2 Extreme is best suited for applications under 1000 rpm.

Typical characteristics are shown below:


PURITY™ FG2 Extreme
Soap Type Aluminum Complex
NLGI Grade 2
Color White
Worked Penetration @ 25°C 276
Dropping Point, °C/°F
264/507
Base Oil Viscosity, cSt @ 40°C 469
Base Oil Viscosity, cSt @ 100°C
33.2
Weld Point, kg 400
Operating Temperature Range
-20°C (-4°F) to 200°C (320°F)

PURITY™ FG2 Clear grease is an advanced colorless lubricant specially formulated to deliver superior performance under the highly demanding conditions of food processing operations when compared to other clear food grade greases. PURITY™ FG2 Clear grease is NSF H1 registered and designed for use in anti-friction bearings, slides, and guides through food processing and industrial plants. It is specifically formulated for beverage production machinery such as canning and bottling equipment.

Typical characteristics are shown below:


PURITY™ FG2 Clear
Soap Type Aluminum Complex
NLGI Grade 2
Color Clear
Worked Penetration @ 25°C 293
Dropping Point, °C/°F
277/531
Base Oil Viscosity, cSt @ 40°C
185
Base Oil Viscosity, cSt @ 100°C
18
Weld Point, kg 200
Operating Temperature Range
-20°C (-4°F) to 160°C (320°F)

PURITY™ FG2 Synthetic and PURITY™ FG2 Synthetic Heavy 220 greases are NSF H1 registered products specially formulated with synthetic base oils to provide outstanding lubrication in food processing applications running under heavier loads or subject to high and low temperature extremes. They are recommended as multiservice or multi- application lubricants across all food processing applications such as cold temperature applications including freezers, high temperature applications including ovens, multi service bearings, canning, bottling equipment, animal feed pellet mills and mixers. PURITY™ FG2 Synthetic Heavy 220 has enhanced tackiness to stay in place. 

PURITY™ FG2 Synthetic, PURITY™ FG2 Synthetic Heavy 220 and PURITY™ FG2 Multipurpose have been designed to meet the highest food industry safety standards and can be easily integrated into Hazard Analysis and Critical Control Point (HACCP) plans and Good Manufacturing Practice (GMP) programs.

Typical characteristics are shown below:


PURITY™ GREASES

FG2 Synthetic FG2 Synthetic Heavy 220
Thickener Type Calcium Sulphonate Complex Calcium Sulphonate Complex
Color Tan Tan
Worked Penetration @ 25°C 294 268
Dropping Point, °C/°F 304/579 >304/579
Base Oil Viscosity, cSt @ 40°C 50 220
Base Oil Viscosity, cSt @ 100°C 7.8 24.0
Weld Point, kg 500 400
Operating Range,°C 40 to 200 -25 to 200
Operating Range,°F -40 to 392 -13 to 392
Minimum Dispensing Temperature,
°C/°F
35/-31 -20/-4

Please refer to the Food Industry Registrations/Credentials chart on 360 Marketing Support (LUB3152) or contact your local representative.

Petro-Canada Lubricants PURITY™ FG2 MULTI PURPOSE is a H1 food grade lubricant with white mineral base oil, tackifier and fortified with additional EP additives specially formulated for tough food processing applications where high loads can be challenging. This advanced formula contains a patented thickener complex to provide outstanding wear and extreme pressure protection, with excellent mechanical stability in the presence of heat and water to keep surfaces well lubricated.

Ideal for wide operating temperatures, rust prevention and enhanced resistance to water washout, PURITY™ FG2 MULTI PURPOSE is a solution for all types of food processing and general industrial applications.

PURITY™ FG2 MULTI PURPOSE has been designed to meet the highest food industry safety standards and can be easily integrated into Hazard Analysis and Critical Control Point (HACCP) plans and Good Manufacturing Practice (GMP) programs.


  PURITY™ FG
Multipurpose
PURITY™
FG2 Synthetic
 PURITY™
FG2 Synthetic Heavy 220
NLGI Grade 2 2 2
Soap Type Calcium Sulphonate Complex Calcium Sulphonate Complex Calcium Sulphonate Complex
Color Tan Tan Tan
Worked Penetration @ 25°C 280 294 268
Dropping Point, °C/°F
>309/>588  >304/579  >304/579
Base Oil Viscosity, cSt @ 40°C
105 50.0
220
Base Oil Viscosity, cSt @ 100°C
11.3 7.8 24.0
Weld Point, kg 620 500 400
Operating Temperature Range

-25°C (-13°F) to

160°C (320°F)

-40°C (-40°F) to

200°C (392°F)

-25°C (-13°F) to

200°C (392°F)

Symbols

  1. Agriculture
  2. Consumer Automobile
  3. Construction
  4. Food & Beverage
  5. Forestry
  6. Heavy-Duty Transportation
  7. General Manufacturing
  8. Medium-Duty Transportation
  9. Mining
  10. Corrugated Packaging
  11. Gas Plants, Pipelines & Power Generation
  12. Rail
  13. Transit
  14. Waste Operations